|
|
|
|
 7: Get your new sprocket ...  7: Get your new sprocket handy.  8: After slipping the old...  8: After slipping the old sprocket out, slide the new one into the chain. Align the grooves in the sprocket with the ribs on the shaft, and slide the sprocket back into the shaft. Take your time and it will slide on without much effort.  9: Slide the flat washer onto...  9: Slide the flat washer onto the shaft, again aligning the grooves to the ribs.  10: Screw the nut back into...  10: Screw the nut back into place.  11: Tighten the nut back down,...  11: Tighten the nut back down, then fold the washer back over the nut by tapping it back down with the edge of a screwdriver.  12: Replace the cover and...  12: Replace the cover and make any tightening adjustments to the chain at the rear wheel adjusters.
|
|
|