Better wind protection and improved looks come easy with an aftermarket windscreen. And installation on the 2009 Kawasaki ZX-6R is pretty quick and easy.
1: The stock clear screen...
1: The stock clear screen looks pretty boring.
2: A view from the tucked...
2: A view from the tucked position through the stock screen. Try to ignore the cluttered garage.
3: Start by loosening the...
3: Start by loosening the screen bolts. This is the very top bolt-they're all 4mm Allen heads.
4: Here's a view of the void...
4: Here's a view of the void left by the mirror and bracket.
5: Keep on moving your way...
5: Keep on moving your way around the front, removing the bolts as you go.
6: The stock screen has a...
6: The stock screen has a rubber grommet in the uppermost hole on each side. Remove it.
7: The aftermarket screen...
7: The aftermarket screen has a large hole to accept the stock rubber grommet.
8: Work the grommet into the...
8: Work the grommet into the upper hole on each side of the aftermarket screen.
9: Here's your bike waiting...
9: Here's your bike waiting for a new screen, but it won't be long now...
10: Slip the new screen into...
10: Slip the new screen into place and loosely tighten each bolt.
11: Save the mirrors for last...
11: Save the mirrors for last to make sure everything is lined up properly.
12: After installing the mirrors...
12: After installing the mirrors tighten all the bolts and enjoy your new screen. Looks good, eh?
13: There's your new and improved...
13: There's your new and improved look!