Better wind protection and improved looks come easy with an aftermarket windscreen. Installation on the 2009 Kawasaki ZX-10R is pretty quick and easy.
The clear stock screen looks...
The clear stock screen looks boring for sure.
Start by loosening the screen...
Start by loosening the screen bolts. This is the very top bolt-they're all 4mm Allen heads. There are two silver bolts on either side, and four black bolts across the bottom. No need to remove the mirrors.
Once all the bolts are removed...
Once all the bolts are removed give it a firm tug and it'll wiggle out of its placement.
As it loosens, simply pluck...
As it loosens, simply pluck it out of the upper fairing.
The stock screen has a rubber...
The stock screen has a rubber grommet in the uppermost hole on each side. Remove both.
The aftermarket screen has...
The aftermarket screen has a large hole on each side to accept the stock rubber grommet. Push it into place on the RSD screen.
Slide the screen into place,...
Slide the screen into place, and line up the lower four holes over the top of the rubber grommets that are already in the fairing.
Tighten all six bolts down...
Tighten all six bolts down and then enjoy your smart and classy new RSD "Clarion" windscreen.